Medical Cables
Medical Cables, lead ecg Cables for medical devices have to be reliable and save. Medical Cables are used in different areas and must meet the highest requirements.
Torven medical cables and patient‑monitoring lead assemblies are engineered for clinical safety, signal integrity and long‑term durability for patient monitoring systems. These cable assemblies adopt medical‑grade flexible insulation materials, integrated with our push‑pull self‑locking circular connectors. Fully‑shielded construction minimizes electromagnetic interference to guarantee precise biometric signal acquisition. The portfolio covers ECG trunk & lead cables, reusable SpO2 sensor cables, temperature‑sensor cables and custom medical jumper cables. These assemblies withstand repeated bending, cleaning and frequent plug‑unplug cycles, suitable for hospital wards, operating rooms, emergency care and portable diagnostic devices. OEM & ODM customisation for pin assignment, cable length and connector configuration are supported.
Main Product Types
MS‑90043
Medical Push‑pull Interconnect Cable Assembly
Complete pre‑assembled harness mated with dual plastic push‑pull circular connectors. Robust self‑latching connection prevents accidental disconnection caused by cable tugging. Medical‑grade flexible cable jacket for repeated handling. Used for signal transmission between patient‑monitoring modules and host equipment.
ECG‑044
Reusable ECG Trunk Cable with Multi‑clip Lead Wires
Integrated ECG patient trunk cable equipped with multi‑colored alligator electrode clips. Color‑coded leads simplify bedside setup. Well‑shielded cable suppresses ambient noise for stable ECG waveform output. Compatible with mainstream patient monitors for routine cardiac monitoring.
ECG‑009
ECG Lead‑wire Assembly with Snap Electrodes
Multi‑lead ECG cable terminated with snap‑style electrode buttons. Matched with push‑pull circular connector at equipment‑end. Soft, torsion‑resistant cable construction reduces motion artefacts during patient movement. Designed for continuous bedside ECG monitoring.
ROP‑041
Reusable Finger‑clip SpO2 Sensor Cable
Classic reusable pulse oximetry sensor with adult finger clip. Integrated shielded signal cable terminated with medical push‑pull plug. Delicate optical‑sensor unit provides reliable SpO2 and pulse‑rate measurement for general‑ward patient monitoring.
ROP‑019
Reusable SpO2 Sensor Cable
Durable reusable SpO2 finger‑clip assembly, complete with finished medical connector. Optimized mechanical strain relief at cable‑to‑sensor transition point to extend service life. Suited for long‑term repeated clinical usage.
ROP‑011
Blue‑jacket Reusable SpO2 Sensor Assembly
Blue medical‑grade cable jacket, reusable finger‑clip SpO2 probe. High‑flex cable resists cracking under frequent bending. Push‑pull self‑locking connector enables fast, secure connection to patient monitors.
MS‑90107
Skin‑surface Temperature‑sensor Cable Assembly
Disposable‑style reusable surface temperature probe with disc‑type thermal sensor tip. Paired with colour‑coded push‑pull connector. Delivers accurate body‑surface temperature readings for patient monitoring systems. Compact footprint for patient comfort.
MS‑90105
Probe‑style Temperature‑sensor Cable
Miniature temperature‑sensing probe cable with slim sensor tip. Flexible short‑run harness with colour‑keyed push‑pull plug. Applied for skin or cavity temperature measurement in diagnostic & monitoring devices.
MS‑90045
Medical Push‑pull Jumper Cable
Short‑length medical adapter / jumper cable, assembled with two mating push‑pull circular connectors. Used for signal‑path extension and module interconnection within medical equipment cabinets and monitoring workstations. Compact, space‑saving wiring solution.
Key Features
- Matched with Torven push‑pull self‑locking circular medical connectors for secure, tool‑free mating
- Medical‑grade flexible jacket material, resistant to common surface disinfectants
- Multi‑layer shielding design for anti‑EMI performance, reduces signal noise for biometric measurement
- Reinforced strain‑relief structure at cable‑connector junction for high flex‑cycle durability
- Multiple variants: ECG leads, SpO2 sensors, temperature probes and custom jumper assemblies
- Colour‑coded connectors and lead wires for visual identification and anti‑mismating
- Support custom cable length, pin‑out, connector keying and over‑molding upon request
- Compliant with RoHS requirements for medical electronic assemblies
Typical Applications
Bedside patient monitors, portable diagnostic devices, emergency & ICU monitoring equipment, vital‑sign measurement instruments, clinical monitoring modules and medical lab devices.